In good things also need maintenance, worm gear worm reducer is no exception.

Worm gear reducer maintenance maintenance of worm gear manufacturers to provide 4 methods, the following is the specific content:

1. Oil supply temperature of worm gear and worm reducer. Check the temperature from time to time. The temperature is between 40 degrees Celsius and 50 degrees Celsius. If it is outside the range then you need to adjust the oil supply or the oil cooler supply.

2. In addition to detecting the oil supply temperature of the worm gear and worm reducer, we must also test the bearing bracket temperature. The normal first shaft temperature is 20 to 50°C higher than the lube oil served, and other bearing brackets are open to 10°C higher than the served oil temperature. If the temperature difference is too large, it must be stopped for detection.

3. The oil reclamation of the lubricating oil storage tank should also be checked. This is to keep the oil quantity higher than the lowest position of the oil target.

4. The lubricating oil in the storage tank of the worm gear and worm reducer must be used with one kind of lubricating oil, not enough to use two different kinds of lubricating oil mixed.